Edirol V-4 Owner's Manual page 95

●A ch effect 3
This specifies effect 3 on/off and the parameter for channel A in Normal mode or the base
channel in Presentation mode.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to OFF, ON:0–Max.
●A ch effect 4
This specifies effect 4 on/off and the parameter for channel A in Normal mode or the base
channel in Presentation mode.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to OFF, ON:0–Max.
●B ch effect 1
This specifies effect 1 on/off and the parameter for channel B in Normal mode.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to OFF, ON:0–Max.
●B ch effect 2
This specifies effect 2 on/off and the parameter for channel B in Normal mode.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to OFF, ON:0–Max.
●B ch effect 3
This specifies effect 3 on/off and the parameter for channel B in Normal mode.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to OFF, ON:0–Max.
●B ch effect 4
This specifies effect 4 on/off and the parameter for channel B in Normal mode.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to OFF, ON:0–Max.
●Transition Select
Selects the type of transition.
With the factory settings this is unassigned.
Values are 0-2, corresponding to Transition 1, Transition 2 and Transition 3.
●Transformer A
Turns channel A TRANSFORMER on/off.
With the factory settings this is unassigned.
Values are 0-63 and 64-127, corresponding to OFF and ON.
●Transformer B
Turns channel B TRANSFORMER on/off.
With the factory settings this is unassigned.
Values are 0–63 and 64–127, corresponding to OFF and ON.
●Output Fade
Controls OUTPUT FADE.
With the factory settings this is unassigned.
Values are 0 - 64 - 127, corresponding to Black - Center - White.
●BPM Sync
Switches BPM SYNC on/off.
With the factory settings this is unassigned.
Values are 0-63 and 64-127, corresponding to OFF and ON.
●Video Fader
Controls the VIDEO FADER.
With the factory settings this is assigned to CC#11 (Expression).
Values are 0-127, corresponding to A (base)-B (sub).
■Factory Setting of V-LINK
The factory setting of V-LINK (receipt of V-LINK ON message only) is as follows.
+————————————————————————————————————————————————————————————————+
|Parameter |Assign
+————————————————————————————————————————————————————————————————+
|V—4 Mode |—
|Note Mode |—
|Rx Channel |—
|Tx Channel |—
|Input Select |—
| |
|Memory Select |—
|Transition Time|CC#5(Portament Time)
|A ch Effect 1 |OFF
|A ch Effect 2 |OFF
|A ch Effect 3 |OFF
|A ch Effect 4 |OFF
|B ch Effect 1 |OFF
|B ch Effect 2 |OFF
|B ch Effect 3 |OFF
|B ch Effect 4 |OFF
|Transition |
|Select |OFF
|Transformer A |OFF
|Transformer B |OFF
|Output Fade |OFF
|BPM Sync |OFF
|Video Fader |CC#11(Expression)
+————————————————————————————————————————————————————————————————+
* When V-LINK is off, V-LINK message will be ignored.
* The changes of setting done while V-LINK is on will not be saved.
* When V-LINK is turned off, the setting before V-LINK turned on will be recalled.
MIDI Implementation
|Value
|Presentation Mode
|OFF
|1
|1
|Ach : 1
|Bch : 2
|1
|0.0 sec
|OFF
|OFF
|OFF
|OFF
|OFF
|OFF
|OFF
|OFF
|
|1
|OFF
|OFF
|Center
|OFF
|A 100%
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
95