ViewSonic VT2215LED User Manual page 31

Using the TV Features
Adjusting the Settings
1. Press the MENU button to display the OSD main menu. There are six top menus on the screen:
PICTURE, SOUND, CHANNEL, PARENTAL, SETUP, and OTHERS. (CHANNEL menu can only be
enabled in TV source.)
2. Press ◄ or ► to select your desired top menu.
3. Press ENTER to enter the menu you select.
4. Use ▲▼ to select the control you want to adjust.
5. When selecting the control with ►, press ► to enter next level menu or enable the function.
(► will only appear when the control is highlighted)
6. Press ◄► to adjust or select the settings.
7. Press MENU to exit from the OSD menu.
Picture menu
Function Description
Picture Mode To select picture mode.
Brightness To adjust luminance of video.
Contrast To adjust contrast of video.
Color To adjust color.(Except PC source)
Tint To adjust tint level.(Except PC source)
Sharpness
To adjust picture sharpness.
Screen Size
To select image size between Normal,Wide,Cinema,Zoom.
To fine tune the image.(Only enabled in PC source)
* Auto Adjust: To auto adjust picture's horizontal
position, vertical position, clock, phase, fine tune and
H-Size.
* Horizontal Position: To adjust the horizontal
position of the
picture.
PC Settings
* Vertical Position: To adjust the vertical position of
the picture.
* Clock: To adjust delay time of clock in order to
reduce the noise of picture.
* Phase: To adjust delay time of phase in order to
reduce the noise of picture.
* Reset: Reset the parameters of current menu to
default value.
Color
To select and adjust color mode.
Temperature
* Dynamic Contrast: Off/Low/Medium/High
The system will adjust the luminance curve by
analyzing the picture content dynamically.
* Film Mode: Off/On
For the 2:2 or 3:2 format signal of cinema,enable
special pixel process to reduce the flick of moving
Advanced
area.
Picture
* Noise Reduction: Off/Low/Medium/High
Settings
You can clear up analog TV signal by reducing the
dot noise.This feature is not available at PC or Media
source.
*MPEG Noise Reduction: Off/Low/Medium/High
Similar with the Noise Reduction ,you can set to
reduce the block noise.
22