Table of Contents
Advertisement
4. Press the blue release button and remove the optical drive out of the front of
the computer.
Note: There is a spare retaining bracket 1 attached to the side of the upper
drive cage.
Figure 25. Removing the optical drive
5. Remove the retaining bracket from the optical drive being replaced and install
it on the new optical drive.
Figure 26. Retaining bracket for optical drive
6. Slide the new optical drive into the bay from the front until it snaps into
position.
7. Connect the signal cable and the power cable to the optical drive.
8. Go to "Completing the parts replacement" on page 47.
Chapter 2. Installing options and replacing hardware
39
Advertisement
Table of Contents
