Table of Contents
Advertisement
–
Static IP: Specify if you want to manually enter an IP address.
Remove the check mark if you want the server to automatically
assign the IP address.
–
Local phone IP: The IP address obtained from the network
operator, if you checked the Static IP option.
–
Static DNS: Specify if you want to manually enter the Domain
Name Server (DNS) address. Remove the check mark if you
want the server to automatically assign the IP address.
–
Server 1/Server 2: The Domain Name Server (DNS)
addresses.
–
Traffic Class: The traffic class.
OK
Press
to exit Advanced.
Save
6. Press
to save these settings.
Note: The WAP settings may vary depending on the service
provider.
Bluetooth
Bluetooth is a short-range wireless communications
technology capable of exchanging information over a
distance of about 30 feet without requiring a physical
connection.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within
connectivity range of one another, you can exchange
information between them, even if they are located in
different rooms.
The Bluetooth wireless technology settings menu provides
the ability to view and change the device name, show the
visibility, and set the security for the device.
Activation
The activation option allows you to use the Bluetooth
features available when Bluetooth is activated. When the
Bluetooth is deactivated, you cannot send or receive
information via Bluetooth. To save battery life or in situations
where Bluetooth use is prohibited, you can turn off the
Bluetooth wireless technology headset.
1. In Idle mode, press Menu
Bluetooth.
2. If the first item in the Bluetooth menu is Bluetooth : Off,
then highlight the Bluetooth : Off option and press
Select or
.
Settings
Connectivity
Connections
104
Hide quick links:
Advertisement
Table of Contents
