MSI TV@nywhere A/D Quick Installation Manual page 2

1. Before installing your new TV@nywhere A/D, it is necessary to install
DirectX 9.0c or higher for your operating system. Insert your TV@nywhere
A/D software CD, and the installation menu should load automatically.
Here, click on DirectX and follow the on-screen prompts. You may have to
restart your computer after installation.
Note: If the Autostart program does not appear automatically when you
insert your Installation CD, click on the Start Button, then Run... and type
D:\InstallCD.exe (if D:\ is your CD-Rom drive).
2. Install the hardware:
A. Turn off the computer power and remove the cover from the case of
your PC
B. Push the TV@nywhere A/D firmly into the slot, ensuring good contact.
C. Fasten the TV card with an appropriate screw.
D. Connect the TV cable with the connector of your TV Card
E. Reinstall the cover of your PC Case and reconnect all of your
peripheral devices if necessary
F. Restart your computer.
All specifications and information are subject to changes without further notice.