Vpu Recover - Gigabyte GV-R487X2-2GH-B User Manual

VPU Recover:

VPU Recover is a tool capable of detecting the rare situation when the graphics processor is no longer
able to respond to display driver commands. When this occurs, VPU Recover attempts to reset the
graphics processor so that you are able to continue using your computer without interruption or loss of
data. In most cases, VPU Recover will be able to reset the graphics processor without requiring a
system restart. If the computer cannot recover from a crash, VPU Recover will switch the computer
to software rendering mode, allowing you to save any work in progress before restarting the computer.
ATI Overdrive:
Use Overdrive to maximize your viewing experience by dynamically and safely overclocking the
graphics processor and memory. Use the Automated clock configuration utility to obtain the ATI
recommended speeds for the graphics processor clock and video memory clock. Alternatively,
manually set these speeds to meet your specific requirements. Finally, Overdrive can be configured
to run when the computer is booted or only when running 3D applications.
Enable VPU Recover
Prepare an error report if VPU Recover is
activated, for submission to ATI Technologies.
Allows the VPU Recover, once it is activated,
to generate an error report that you can send to
ATI via e-mail.
Note:
Because Windows Vista provides the same func-
tionality as this option, VPU Recover is not avail-
able on systems running Windows Vista.
Note:
If your computer cannot restart after setting a
higher clock speed, press and hold the <Shift>
key during system start-up until you hear three
beeps. Once your computer has full booted,
disable Preserve ATI Overdrive settings at logon.
- 33 - Software Installation