Table of Contents
Advertisement
* Default values are indicated in bold characters.
Item
Setting Values
White Clip
100%
108%
Gamma
Film Out
Cinema
Standard
Off
Master Level
Max, 4 to1,
Normal,
-1 to -4, Min
R Level
Max, 4 to1,
Normal,
G Level
-1 to -4, Min
B Level
White Balance...
Menu for adjusting white balance. (A Page 79)
Color Matrix
Cinema Subdued
Cinema Vivid
Standard
Off
Adjust...
This item is used to adjust [Color Matrix] to a color according to the user's preference.
This item cannot be selected when [Color Matrix] is set to Off . (A Page 80)
Color Gain
Off, Min, -1 to -9,
Normal
9 to 1, Max
DNR
On
Off
Reverse Picture
Rotate
Off
Reset Process
For setting the point to apply white clip for input video signals with a high luminance level.
100% : Applies white clip at the point where the luminance level is 100 %. Even when this
item is set to 108% , it switches automatically to 100% if the screen appears too
white. Set to this value when the system in use limits Y output signals within 100 %.
108% : Applies white clip at the point where the luminance level is 108 %.
For adjusting the gamma curve that determines the gradation expression.
Film Out : Sets to a gamma curve that focuses on the gradation expression of dark areas in
order to ease post-processing of movie film output.
Cinema : Sets to a gamma curve with similar gradation to the screen characteristics of
movies.
Standard : Sets to a standard gamma curve.
Off
: Disables gamma curve adjustment.
This item can be specified separately when [Gamma] is set to Standard , Cinema , or Film
Out .
Increase the number : Enhances the gradation of black. However, the gradation of bright areas
Decrease the number: Enhances the gradation of bright areas. However, the gradation of black
Memo :
● When [Gamma] is set to Off , this item appears as --- and cannot be selected.
Gamma curves can be adjusted for each of R, G, and B.
Use this to adjust to a color tone that cannot be expressed by the [Color Matrix] setting.
Memo :
● When [Gamma] is set to Off , this item appears as --- and cannot be selected.
For setting the color matrix.
Cinema Subdued
Cinema Vivid
Standard
Off
For adjusting the video signal color level.
Off
Increase the number : Makes the colors more dense.
Decrease the number : Makes the colors less dense.
Memo :
● Images are displayed in black-and-white when this is set to Off .
For setting the DNR (Digital Noise Reduction) function. The S/N ratio of the video can be
enhanced by setting [DNR] to On .
On
: Enables noise reduction.
Off
: Disables noise reduction.
Memo :
● A retained image may appear when this is set to On .
For recording images correctly by reversing the image horizontally or vertically (Rotate) when
the lens image appears upside down or laterally inverted.
Rotate : Enables horizontal/vertical inversion of the image.
Off
: Disables horizontal/vertical inversion of the image.
^
Restores all items in the [Camera Process...] menu to their default settings.
Function
deteriorates.
deteriorates.
: Sets to a subdued color matrix that is similar to the screen characteristics
of movies.
: Sets to a vivid color matrix that is similar to the screen characteristics of
movies.
: Sets to a standard color matrix.
: Sets the color matrix function to Off.
: Sets the video to black-and-white.
Advertisement
Table of Contents
