Appendix; How To Reflash The Bios In Ms-Dos Mode - Gigabyte GV-N98XPZL-1GH User Manual

5.1. How to Reflash the BIOS in MS-DOS Mode

1. Extract the downloaded Zip file to your hard disk(s) or floppy disk. This procedure assumes drive A.
2. Restart the computer in MS-DOS mode. (You may need a startup disk to restart the computer in
MS-DOS mode.)
3. Change the command prompt to A:\>.
4. To back up the current BIOS, at the A:\> prompt, type[BIOS flash utility name]
- s [ B I O S f i l e n a m e ] (example: gvf18 -s 98XPGH.f1) and press Enter.
5. To flash BIOS, at the A:\> prompt, type[ B I O S
[ B I O S f i l e n a m e ] (example: gvf18 -p 98XPGH.f2) and press Enter.
6. Wait until it's done, then restart your computer.

5. Appendix

f l a s h
- 35 -
u t i l i t y n a m e ] - p
Appendix