Gigabyte GV-N98TOC-1GH User Manual page 8

Step 4.
To connect an HDMI TV, use either Method A or
Method B below (depending on your motherboard
design) to enable the S/PDIF in function for the graph-
ics card. It is recommended Method A be used on
motherboards that have a free S/PDIF header.
Method A (via the S/PDIF out header):
Connect the provided S/PDIF cable to the graphics
card and the S/PDIF out header on your motherboard
(the red wire connects to the S/PDIF out pin and the
black to the Ground pin).
Method B (via the coaxial S/PDIF out jack):
Connect the GIGABYTE video adapter to the TV-
Out port on the graphics card. Insert one end of the
SPDIF coaxial cable (optional) into the S/PDIF in
jack on the adapter and the other end into the co-
axial S/PDIF out jack on your motheboard.
You are now ready to proceed with the installation of the graphics card driver. Please refer to next
chapter for detailed instructions.
GV-N98TOC-1GH/512H Graphics Accelerator
A-1. Connect the S/PDIF cable to the graphics card
A-2. Connect the S/PDIF cable to the motherboard.
B-1. Connect the GIGABYTE video adapter to the TV-
Out port on the graphics card
B-2.Connect the SPDIF coaxial cable (optional)
to the video adapter and motherboard
- 8 -