VTech Sit-to-Stand Alphabet Train User Manual page 9

5. position the handle so that the curved
part of the handle faces the back of the
engine. insert the handle into the hole
in the top of the engine until you hear
a click. once you have installed the
handle, it cannot be removed.
6. position the soft, blue hinge so that its
large hole is facing up and to the front.
insert the hinge into the hole at the front
of the carriage and push until you hear
a click. once you have installed the
hinge, it cannot be removed.
7. To attach the carriage to the engine,
insert it into the slot at the back of
engine. You will hear a click, which
lets you know the carriage is attached
correctly.
8. To detach the carriage from the engine, push the blue button at the
end of the engine in and then push it up. once the button is pushed
up, pull the carriage from the slot.