Search; Skip; Intro Search - Harman Kardon HD750 Owner's Manual

Operation

Search

If you wish to quickly scan through a disc to
locate a particular passage or program, press the
Search buttons 6 . The Forward Search
button — plays the disc forward in high
speed, while the Reverse Search button ‚
plays the disc backwards in high speed. Holding
the buttons pressed will tripple the search speed
after 3 seconds. When the desired part of the
disc is heard, release the Search button to
resume normal play speed.
12 OPERATION

Skip

To move from one track on the disc to another
during play mode, press one of the Skip buttons
7 . Pressing the Forward Skip button
fl· will move you forwards through the disc,
one track at a time, while pressing the Reverse
Skip button ‡fi once will move you back to
the start of the actual track (as long as >1 sec-
ond of the track has elapsed) and pressing it
multiple times will move you back one track at a
time. Holding any Skip button pressed will fastly
scan through all tracks on the disc.
The Skip buttons may be used when the HD750
is either playing or stopped. If the unit is
stopped, the Skip buttons may be used to locate
the first track to be played. The Play button 4
must be pressed to begin play. If the Skip
buttons are used while the unit is already play-
ing (as described above), the audio output will
stop while the new track is located, and play will
automatically resume after the Skip button is
released.
If the Skip buttons are pressed when program
play is in use (see page 13), the unit will move
from one programmed track to another.

Intro Search

This feature lets you locate a track by playing the
first 10 seconds of each track, up from the track
playing or selected actually. When the Intro but-
ton 9 on the front panel is pressed, the unit
will play only 10 seconds of each track, and then
automatically move to the next track. When you
have reached a track that you wish to listen to in
its entirety, press the Intro button again to
resume normal operation. When the Intro fea-
ture is activated, the INTRO indicator will illumi-
nate in the Information Display % to remind
you that Intro Search is in use.