Table of Contents
Advertisement
To do this, the non-VGA graphic controller watches for the Write access to the
VGA palette and registers the snoop data. In PCI based systems, where the
VGA controller is on the PCI bus and a non-VGA graphic controller is on an ISA
bus, the Write Access to the palette will not show up on the ISA bus if the PCI
VGA controller responds to the Write.
In this case, the PCI VGA controller should not respond to the Write, it should
only snoop the data and permit the access to be forwarded to the ISA bus. The
non-VGA ISA graphic controller can then snoop the data on the ISA bus.
Unless you have the above situation, you should disable this option.
The Choices: Disabled (default) Disables the function.
Enabled
Assign IRQ For VGA
This item allows the users to choose which IRQ to assign for the VGA.
The Choices: Enabled (default), Disabled.
Assign IRQ For USB
This item allows the users to choose which IRQ to assign for the USB.
The Choices: Enabled (default), Disabled.
Enables the function.
- 27 -
BIOS Setup
Advertisement
Table of Contents
