Table of Contents
Advertisement
PnP/PCI Configurations
This section describes configuring the PCI bus system. PCI, or Personal
Computer Interconnect, is a system which allows I/O devices to operate at
speeds nearing the speed of the CPU itself uses when communicating with its
own special components. This section covers some very technical items and it is
strongly recommended that only experienced users should make any changes
to the default settings.
Figure 7. PnP/PCI Configurations
!
PNP OS Installed
When set to YES, BIOS will only initialize the PnP cards used for the boot
sequence (VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP
operating system like Window™ 95. When set to NO, BIOS will initialize all the
PnP cards. For non-PnP operating systems (DOS, Netware™), this option must
set to NO.
The Choices: No (default), Yes.
Reset Configuration Data
The system BIOS supports the PnP feature which requires the system to record
which resources are assigned and protects resources from conflict.
peripheral device has a node, which is called ESCD. This node records which
resources are assigned to it. The system needs to record and update ESCD to
the memory locations.
These locations (4K) are reserved in the system BIOS.
- 24 -
BIOS Setup
Every
Advertisement
Table of Contents
