Table of Contents
Advertisement
71
Camera
Image adjustments
White balance
ISO (photo mode only) Choose an ISO level or set it back to Auto. Higher ISO
Resolution/Video
quality
Review duration
Storage
Widescreen (photo
mode only)
Geo-tag photos (photo
mode only)
Auto enhance (photo
mode only)
Auto focus (photo
mode only)
Face detection (photo
mode only)
Shutter sound
Grid (photo mode
only)
Stereo recording
(video mode only)
Record with audio
(video mode only)
Slow motion(2X)
(video mode only)
Reset to default
Slide your finger across each of the slider bars to adjust the
exposure, contrast, saturation, and sharpness.
White balance enables the camera to capture colors more
accurately by adjusting to your current lighting
environment.
numbers are better for taking pictures in low light
conditions.
Choose a photo or video resolution to use.
Set the time for a captured photo or video to be displayed
on the Review screen before the camera changes back to
the Viewfinder screen.
Choose the storage option to use in saving photos and
videos you've captured.
When this check box is selected (default), photo resolutions
available for selection are in 16:9 ratio and you can use the
entire Viewfinder screen to frame your subject. When not
selected, photo resolutions available for selection are in
standard 4:3 ratio.
Select to store GPS location in your captured photos.
Select to reduce noise when using a high ISO setting and to
automatically adjust photo brightness.
Enables or disables centered auto focus.
Select to automatically recognize faces and adjust the focus
when you take people photos. Face detection will be turned
off if you disable auto focus.
Select to play a sound when you press the shutter release
or record button.
Select to display a grid on the Viewfinder screen so you can
easily frame and center your subject before taking the
photo.
Select to record sound in stereo when capturing videos.
Select to record audio when capturing videos.
Select to play the recorded video at a slower speed (twice
longer than its actual recording length).
Change the camera settings back to default.
Advertisement
Table of Contents
