Efficient Networks SpeedStream 5667 User Manual page 14

SpeedStream Dual USB/Ethernet Router User's Guide
Model 5667
5. Plug the power adapter into the power outlet and router.
6. Power on the computer; then power on the router.
Note:
If connecting via USB, the Plug-and-Play process for installing the USB drivers begins as
soon as you turn on your computer and the router device is discovered. Insert the
SpeedStream CD-ROM and follow the instructions on the screens to install the drivers.
Ethernet Installation Method
1. Connect the Ethernet straight through cable to the Ethernet port on the router.
2. Connect the other end of the Ethernet cable to the Ethernet port on your computer.
3. Plug the phone cable into the DSL port on the router.
4. Plug the other end of the phone cable into the phone jack.
Note:
If using a two-to-one adapter, plug the cable into the open socket.
5. Plug the power adapter onto the power outlet and router.
6. Power on the computer; then power on the router.
There is no router software installation required when using the Ethernet connection method.
Refer to your Internet Service Provider's instructions for installing their software and/or
connecting to the Internet.
You are now ready to configure the TCP/IP settings as detailed in the next chapter.
14