RocketFish RF-GWII053 Quick Setup Manual

Wii Rechargeable Induction Battery

Package contents

• Rechargeable induction battery (1)
• Quick Setup Guide
WARNING: The RF-GWII053 rechargeable induction battery is designed
only for use with the RF-GWII052 Induction Charge Kit (sold separately).

Installing the battery

1 Remove the Wii remote jacket (if necessary), then remove the
battery compartment cover.
2 Install the battery pack into the remote.
RF-GWII053
RF-GWII053_09-0480_QSG_V1_ENG.indd 1 RF-GWII053_09-0480_QSG_V1_ENG.indd 1
3 Put the Wii remote jacket back on the remote.
Using the charger
1 Insert the plug into the DC IN connector on the remote
induction charger (sold separately), then plug the AC adapter
into a power outlet.
2 Turn on the charger, then place the remote with the battery
pack installed on the charger. The charger will work with or
without the jacket on the Wii remote.
Note: You should place the remote parallel with the center bar and the
remote should be straight and centered on the charger.
QUICK SETUP GUIDE
remote induction charger
(sold separately)
7/17/2009 12:35:08 PM 7/17/2009 12:35:08 PM