Advertisement
Step
1
Network cards are sensitive to static electricity. Avoid touching its electrical components. To eliminate static electricity, always
touch the chassis of your computer before handling the card. Backup your driver and use the copy as the working copy to
protect the original from accidental damage.
(Optional step)
Testing Program: If the host computer does not automatically configure the SpeedStream
®
1020 PCI adapter, or if there is a
problem with the card, run the DOS-based Testing Program to view the computer's BIOS settings. Boot the computer to a full
DOS environment (not a DOS window) and run the Testing Program, "ACCTEST.EXE", from the driver floppy disk. If any of the
diagnostic tests fail, reboot your computer and run the diagnostics again to see if the problem persists. If it does, record the
failure indicated and contact Technical Support for assistance.
1
Advertisement
