Preview Settings; Setting The System Tempo; Switching The Driver; Restoring The Factory Settings - Edirol Studio Canvas SD-80 Owner's Manual

System-related settings

Preview settings

By pressing [PREVIEW] you can audition the currently selected sound. This is called the preview
function.
Here you can make settings for the preview function ("Auditioning the sounds (Preview)" (p. 14)).
Preview Mode
Switches the mode of the Preview function. Select
PHRASE to use phrase preview, or SINGLE to select
single-note preview.
Preview Note
Specifies the pitch (key) of the note that will be
sounded for single-note preview.
Preview Velocity
Specifies the volume (velocity) of previews.

Setting the system tempo

System Tempo
fig.7-1h
This sets the tempo of the entire SD-80 system. When
you set the Delay Time of an internal sound generator
effect (MFX) to Clock (Tempo), it will follow the
tempo you specify here.

Switching the driver

fig.7-1h
USB Driver
Selects the type of driver that will be used when the
SD-80 is connected to your computer.
VENDOR: The dedicated driver provided on the included CD-ROM will be used, allowing stable, high-
GENERIC: The standard MIDI driver provided by the OS will be used.

Restoring the factory settings

fig.7-1i
Factory Reset
This resets all system parameters of the SD-80 to their
factory-set condition.
52
PHRASE, SINGLE
C-1–C4–G9
0–127
20–120–250
VENDOR, GENERIC
speed MIDI transmission and reception. Normally, you should use this driver.