Editing An Image; Automatic Adjustment Using Ib; High-Level - Canon EOS 5D Mark II - EOS 5D Mark II 21.1MP Full Frame CMOS Digital SLR Camera Instruction Manual

Editing an Image

If the brightness or color of images is different from what you visualized
when you shot the photo, you can adjust an image using the editing
functions to bring them closer to what you visualized.
This section explains about automatic adjustment of images, adjustment
of brightness/saturation, trimming images, inserting text into images,
adjustment of sharpness, red-eye correction, and cutting movies.
JPEG images deteriorate slightly when edited and saved, and the image
before editing cannot be recovered. For this reason, an edited JPEG
image should be saved as a separate image from the original image.
Chapter 3 explains about high-level editing functions other than those
described above.
You can edit RAW images in Digital Photo Professional (hereinafter,
"DPP"). Select the RAW image in the Main Window and select the
[File] menu [Process RAW Images by Digital Photo Professional],
which will start up DPP. For detailed instructions on using DPP,
refer to "Digital Photo Professional Instruction Manual" (PDF
electronic manual).

Automatic Adjustment Using IB

The brightness and colors, etc. of the image are automatically adjusted.
1
Display the image to edit in the viewer window
2 Click [Edit] and then select [Auto Adjustment] in the
menu that appears.
The [Auto Adjustment] window appears.
3 Click the [Auto Adjust Image] button.
Auto Adjustment window
The image is adjusted.
4
Check the adjustments.
.
(p.17)
Checkmark to display the image before adjustments
5
Click the [OK] button.
The [Auto Adjustment] window closes.
Introduction
Table of
Contents
1
Basic
Operation
2
Advanced
Operation
3

High-Level

Functions
4
Preferences
Reference
Contents
Lookup
Index
26