Downloading; Remote Live View Window Functions; Focusing Manually - Canon EOS 20Da Instruction Manual

You cannot operate the camera when the [Remote Live View
window] is displayed. Pressing the camera's < SET > button (Live
View shooting button on
5D Mk II
REBELT2i 550D REBELT1i 500D
View image on the camera's LCD monitor, allowing you to view
the image while controlling the camera.
On
5D Mk II 7D 60D 50D
, when the cursor is on the capture window's
500D
the shooting mode will not change even if you operate the
camera's Mode dial.
You can shoot by operating the capture window, even if the
[Remote Live View window] is not displayed.
To perform exposure simulation (p.35)
window] or enable display of histograms (p.77), set your camera's
Custom Function [Live View exposure simulation] to [Enable]. On
1D Mk IV 5D Mk II 7D 60D
simulation] in the menu to [Enable].
On
1D Mk IV 5D Mk II 7D 60D
you can also use mirror lockup with remote shooting (You cannot
take test shots after setting mirror lockup.). On
also use silent single shooting.
With , mirror lockup and silent single shooting
1Ds Mk III 1D Mk III
cannot be performed in remote shooting.
The [Test Shooting] window appears when you click the [Test
shooting] button.
During flash shooting, you can take a test shot under the same
conditions as an actual shot, and adjust the white balance based
on the shot test image (p.36).
You can save shot images to both your computer and a memory
card by checkmarking [Save also on the camera's memory card]
in preferences ([Remote Shooting] tab sheet) (p.61).
You can change the software that starts up automatically when
remotely shot images are transferred to your computer from DPP
to ZoomBrowser EX or other software in preferences ([Linked
Software] tab sheet) (p.61).
For a list of the [Remote Live View window] functions, refer to p.77.
For a list of the [Zoom View] Window functions, refer to p.78.
7D 60D 50D
) will also display the Live
REBELT2i 550D REBELT1i
button,
with [Remote Live View
, set [Exposure
50D
,
50D REBELT2i 550D
, you can
1D Mk IV

Remote Live View Window Functions

These pages explain the functions available in the [Remote Live View
window], including checking the camera settings and focusing while
viewing your subject on the computer screen.

Focusing Manually

You can focus manually while viewing the enlarged image in the
[Remote Live View window].
1 Set the lens's focus mode switch to < AF >.
2
Drag [ ] to the section you want to enlarge.
Introduction
Contents at
a Glance
1

Downloading

Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Drag
Reference
Index
31