Automatic Dust Erasure Processing In The Main Window - Canon EOS 20Da Instruction Manual

Additional Information
The dust-erased image can be reverted to its original condition
at any time
A dust-erased image is displayed or printed as a dust-erased image.
However, since the dust on the image is not actually erased, you can
always revert to the original image by clicking the [Undo] button in the
copy stamp window or performing the "Re-Editing an Image"
procedure (p.106).
Check dust erasure in the copy stamp window
Check dust erasure in the copy stamp window. Images before dust
erasure are displayed in other windows and you will be unable to
check them.
Printing dust-erased images
You can print as a dust-erased image by printing it in DPP.
The [Apply Dust Delete Data] button cannot be clicked
Even with an image that has Dust Delete Data attached to it in the
camera, if there is no dust to remove by DPP from the image, the
[Apply Dust Delete Data] button will be disabled.
To erase dust spots that cannot be erased with the automatic
dust erasure processing
In automatic dust erasure processing, dust spots are erased based on
information relating to dust saved in the Dust Delete Data. However,
there may be cases where you will not be able to erase dust spots
depending on the type of dust. If this occurs, erase those dust spots
using the repair function (p.103) or the copy stamp function (p.105).
The image becomes a dust-erased image when saved as a
separate image
The dust-erased JPEG or TIFF image actually becomes a dust-
erased image when saved as a separate image (p.106).
Useful functions of the copy stamp window
Checking the dust erased spots
After step 3, you can display and check in detail the erased dust spots
one by one by pressing the <F> key. (Press the <B> key to return to
the previous dust spot.)
Canceling a specified erased dust spot only
After step 3, you can press the <F> key or the <B> key to display the
erased dust spot, and then press the <delete> key to cancel only the
erased dust spot displayed.
Switch between full screen display/normal screen display using
shortcut keys
You can also switch between full screen display/normal screen
display by pressing the < > + <F11> keys.
Applying the dust erasure result to another image
You can apply dust erasure to the same place in another image by
clicking the [Copy] button to copy the dust erasure results and then
displaying the other image to which you want to apply the results and
clicking the [Paste] button.
For a list of the copy stamp window functions, refer to p.122.

Automatic Dust Erasure Processing in the Main Window

In the main window, you can also automatically erase dust spots in
multiple images appended with Dust Delete Data.
Select multiple images appended with Dust Delete
Data, and then select the [Adjustment] menu
[Apply Dust Delete Data].
Dust spots in all the selected images are erased in a single
operation.
Introduction
Contents at
a Glance
1
Basic
Operation
2
Advanced
Operation
Advanced 3
Image Editing
and Printing
Processing 4
Large Numbers
of Images
Editing
5
JPEG/TIFF
Images
Reference
Index
102