Setting The Built-In Parallel And Seriai Port Options - Epson Progression Setup Manual

SETUP may detect a built-in or optional math coprocessor on
your computer's CPU card. You
coprocessor
if it does not detect one.
No
Setting the Built-in Parallel and Serial Port Options
There are two sets of options you can use to control the
operation of your built-in parallel and serial ports: the primary
port options and the I/O address options. The primary port
options are listed under the
address options are listed under the Port Configuration
heading. The table below lists the options and their available
settings.
Parallel and serial port options
Primary serial l/O address
The default setting for both the parallel and serial port is
The default I/O address setting for both ports is
Enabled.
primary (LPT1 for the parallel port and COM1 for the serial
p m .
If you have not installed any additional ports, you do not need
to change any settings.
2-12 Running the SETUP Program
option if SETUP detects a math coprocessor or
see Yes at the Math
/ Ports heading and the I/O
I O
3F8h - COM1 ', 2F8h - COM2,
338h - COM3, 238h - COM4
I