Selecting A Function With The Fn (Function) Button - Sony SLT-A99V Instruction Manual

Selecting a function with the Fn
(Function) button
This button is used for setting up or executing functions used frequently in
shooting, except for functions from the Quick Navi screen.
1
Press the DISP button to set the screen mode to other than [For
viewfinder] (page 30).
2
Press the Fn button.
3
Select the desired item with v/V/b/B on the multi-selector,
then press the center z to execute.
The setup screen appears.
4
Following the operation guide,
select and execute the desired
function.
To set up the camera directly from the recording information
screen
Turn the front control dial without pressing the center z in step 3. You can
set up the camera directly from the recording information screen.
Additionally, some functions can be fine-tuned using the rear control dial.
34
Operation guide