Fellowes C-420C User Manual page 5

ADVANCED PRODUCT FEATURE MAINTENANCE AND TROUBLESHOOTING
JAM PROOF SYSTEM
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
DISABLING THE FEATURE
1 2
3
Should you choose to disable Once disabled, the blue Shredding can continue with
the system, press and hold Auto light is no longer the system disabled, however
the bulldog and reverse ( ) illuminated (To re-engage, a paper jam may occur with
key at the same time repeat step 1) too many sheets
AUTO OIL
Automatically oils the cutters to enhance performance and extend shredder life.
REFILLING THE OIL
1 2
Low oil indicator will To maintain shredder Once refilled, automatic
signal when your reservoir performance, refill oil oiling will resume
needs refilling reservoir with up to 12
oz. (355 ml.) of shredder
oil (Fellowes 35250)
• All cross-cut shredders require oil for peak performance. If not oiled, a machine may experience
diminished sheet capacity, intrusive noise when shredding and could ultimately stop running. We
recommend that you refill the Auto Oil reservoir as instructed to avoid performance problems.
• If shipping shredder, oil must be drained. Open oil reservoir, pull out basket to access oil drain plug.
Holding suitable container under drain, remove plug and let oil drain out. Replace plug.
SAFESENSE ® TECHNOLOGY
Stops shredder immediately when hands are too close to the opening.
DISABLING THE FEATURE
1 2 3
Should the SafeSense The shredder will simulate To deactivate, shift override
®
indicator stay lit without a jam and SafeSense will switch to the "not active"
®
touching the opening need to be deactivated position
4
ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH H SH SH ENGLISH ENGLISH NGLISH NGLISH GLISH GLISH
Model C 420C Model C-420C
4 5 6
If jam occurs, press and If not cleared, press If steps 4 and 5 do not clear
hold forward ( ) key until reverse ( ) briefly jam, reverse paper all the
the document is completely (repeat steps 4 and 5 way out, remove several
through the shredder until shredded) sheets and refeed
CLEARING THE OIL NOZZLES
1
2
Lift CD flap to clearly Press the bulldog and Oil will spray out of the
see cutters forward keys at the nozzles confirming that they
same time are working properly
4 5 6
Once deactivated, the To clear paper, press Once the paper is cleared,
indicator will flash and and hold forward key
reactivate the SafeSense
the SafeSense feature until paper is shredded feature (To re-engage,
®
will not function
see Operations)
LISH
BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING
CLEANING AUTO-START INFRARED SENSORS
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to run
even if there is no paper present
(Note: two paper detection sensors are located in the center of the paper entry)
TO CLEAN THE SENSORS
1 2
Lift CD flap. Locate Auto-start
infared sensor.
PREVENTIVE MAINTENANCE
• Run shredder once a day in reverse for 15 seconds to clear cutters
• Empty wastebasket when bin full indicator light is illuminated using bag # 3605801
ACCESSORIES
Maintenance is an important part of protecting your investment. Don't forget oil and shredder bags.
• C-420C Shredder plastic bag – #3605801
• Shredder oil – #35250
PROBLEM STILL NOT SOLVED?
Fellowes is committed to giving our customers the support and service they deserve. That is why we offer several options for you to find technical information, step-by-step
assistance and personal attention.
• www.fellowes.com features an extensive on-line support section with a number of self-service options
• Our customer service professionals are dedicated to resolve any of your issues
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
®
.
3 4
Dip cotton swab in Using cotton swab, wipe
rubbing alcohol. away any contamination
from the paper sensors.
5