Edimax HP-8501 User Manual page 13

EDIMAX HP-8501
Quick Installation Guide
The Add button is used to add a remote device to your network that is not listed in the lower panel, for example, a
device currently located on another logical network. Users will be prompted to input the passwords for all devices
they wish to manage and add them to the local logical network by clicking on the Add button. A dialog box will
appear as shown below. The dialog box allows user to enter both device name and the password. A confirmation
box will appear if the password was entered correctly and the device was found. If a device is not found, the user
will be prompted and instructions to this problem will be shown, too.
Figure 6: Add Remote Device
Note: The device must be present on the power line (plugged in) in order to check the password so it can be
added to the network. If the device could not be located, a warning message will be shown.
9