Configuring Windows 98 And Me For Tcp/Ip Networking; Installing Or Verifying Windows Networking Components - NETGEAR WG602 - 54 Mbps Wireless Access Point Reference Manual

Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3

Configuring Windows 98 and Me for TCP/IP Networking

As part of the PC preparation process, you may need to install and configure
TCP/IP on your PC. Before starting, locate your Windows CD; you may need to insert it during the
TCP/IP installation process.

Installing or Verifying Windows Networking Components

To install or verify the necessary components for IP networking:
On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.
1.
Double-click the Network icon.
2.
The Network window opens, which displays a list of installed components:
You must have an Ethernet adapter or an WG602v3, the TCP/IP protocol, and the Client for
Microsoft Networks.
Note: It is not necessary to remove any other network components shown in the
Network window in order to install the adapter, TCP/IP, or Client for Microsoft
Networks.
D-2
202-10060-02, February 2005
Preparing Your PCs for Network Access