Technical Support - NETGEAR WG311v1 - 54 Mbps Wireless PCI Adapter Installation Manual

c. Click the Install Driver & Utility link.
d. Follow the InstallShield Wizard steps, and click Finish when done.
2. Next, install the WG311 Wireless PC Card.
a. Shutdown the PC and remove the power cord from the PC.
Insert the WG311 Wireless PCI Adapter into an available PCI
slot. Reconnect the power cord and reboot the computer.
b. After a short delay, the
Found New Hardware
Wizard displays.
Note: If a Windows 2000
displays a Digital
Signature Not Found
warning, click Yes to
continue the installation.
When installation is
complete, you will see the WG311 system tray icon
lower right portion of the Windows task bar.
3. Now, configure your WG311
a. Open the WG311 Smart Wireless Settings Utility by clicking on
the icon the Windows system tray. The utility opens to the
Settings page.
b. Change the Network
Name SSID to match
your network.
Tip: As an alternative to
typing in the SSID, you
can use the Network tab
to view the available
wireless networks, and
double click on the
desired network.
c. Click the Apply button to activate the connection.
*M-10116-01*
M - 1 0 1 1 6 - 0 1
d. You can also enter a profile name and click on the Save Profile
button to store current settings.
Tip: If you use your desktop PC to connect to a wireless network
at work and at home, create profiles called work and home. Then,
activate whichever one you need for wherever you are located.
4. Finally, verify wireless network connectivity.
Note: You can also use the Networks tab to verify the availability of
wireless networks and their SSIDs. Please see the Reference Manual on
the 54 Mbps Wireless PCI Card WG311 Resource CD.
a. Verify that your connection information matches your
wireless network.
b. Verify connectivity to the Internet or network resources.
Note: If you are unable to connect, see troubleshooting tips in
the Basic Installation section of the Reference Manual on the
WG311 54 Mbps Wireless PCI Adapter Resource CD.
on the
May 2003

Technical Support

PLEASE REFER TO THE SUPPORT INFORMATION CARD
THAT SHIPPED WITH YOUR PRODUCT.
By registering your product at www.NETGEAR.com/register, we can
provide you with faster expert technical support and timely notices of
product and software upgrades.
NETGEAR, INC.
Support Information
Phone: 1-888-NETGEAR (For US & Canada only) - 24 x 7 phone support
See Support information card for other countries.
E-mail: support@NETGEAR.com (24 x 7 online support)
www.NETGEAR.com
©2003 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy, Everybody's
connecting, and Auto Uplink are trademarks or registered trademarks of Netgear in the
United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holder. Information is subject to change without
notice. All rights reserved.