Gigabyte GV-N96GMC-512H User Manual page 8

Step 4.
To connect an HDMI TV, follow the steps below to enable the S/PDIF in function for the graphics card.
1.
Connect the provided S/PDIF cable to the graphics
card.
You are now ready to proceed with the installation of the graphics card driver. Please refer to next
chapter for detailed instructions.
How NVIDIA SLI
®
In an SLI configuration, two SLI-ready graphics cards of the same model and the same manufacturers
are connected together via SLI bridge connector in a system that provides two x16 PCI Express slots
to scale graphics performance. The picture below shows that two graphics cards are linked in parallel
in an SLI configuration.
SLI bridge connector
(provided by motherboard manufacturer)
GV-N96GMC-512H Graphics Accelerator
(Scalable Link Interface) technology works:
TM
2.
Connect the S/PDIF cable to the motherboard.
(the red wire connects to the S/PDIF out pin and
the black to the Ground pin)
- 8 -
Two SLI-ready graphics cards of
the same type.
(Example: GV-NX88X768H-RH)