Insignia NS-42E440A13 User Manual page 17

Insignia 42" 1080p LCD TV
Using DVI (same as HDMI but requires a sound
connection)
Note
You must use the HDMI3/DVI jack to connect a DVD
or Blu-ray player using DVI. If you use another HDMI
jack, you will not hear sound from the TV speakers.
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV's power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
DVD or Blu-ray player.
3 Connect the other end of the cable to the
HDMI3/DVI jack on the side of your TV.
DVD or Blu-ray player
4 Connect a 3.5mm audio cable (not provided) to
the PC IN PC/DVI AUDIO IN jack on the side of
your TV and to the AUDIO OUT jacks on the
DVD or Blu-ray player.
5 Plug your TV's power cord into a power outlet,
then turn on your TV.
6 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
7 Press INPUT to open the Input source list.
8 Press or to select HDMI 3, then press
ENTER.
Note
You can also press HDMI one or more times to select
the DVD or Blu-ray player.
HDMI cable with
HDMI-DVI adapter
3.5mm audio cable
Side of TV
www.insigniaproducts.com
Using component video (better)
To connect a DVD or Blu-ray player using
component video:
1 Make sure that your TV's power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect a component video cable (not
provided) to the COMPONENT IN Y, P
jacks on the back of your TV and to the
COMPONENT OUT jacks on the component
video device.
Back of TV
Component video cable
Cables are often
color-coded to match
color-coded jacks.
3 Connect an audio cable (not provided) to the
COMPONENT IN L/R audio jacks on the back of
your TV and to the L/R AUDIO OUT jacks on the
DVD or Blu-ray player.
Notes
• When you connect the audio using the
COMPONENT IN L/R audio jacks, the audio
output is analog.
4 Plug your TV's power cord into a power outlet,
then turn on your TV.
5 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
6 Press INPUT to open the Input source list.
7 Press or to select Component, then press
ENTER.
Note
You can also press VIDEO to select the DVD or Blu-ray
player.
, and P
B
Audio cable
DVD or Blu-ray player
13
R