Page 1
FEATURES QUIET WASHING CYCLE This washing machine operates washing course quietly because of using inverter motor. STAINLESS PULSATOR The stainless pulsator helps clothes to be washed more cleanly. 10 STEPS WATER LEVEL According to the washload, water is selected for 10 steps automatically. So it helps us to save water.
SAFETY INSTRUCTIONS WARNING! To reduce the risk of fire, electric shock, or injury to persons when using your appliance, take care to adhere to the following precautions. Where an unearthed power cord is not Place clothes evenly into the washer as fitted, be sure that the washer is grounded.
DESCRIPTION OF PARTS WATER SUPPLY HOSE (HOT) WATER SUPPLY HOSE (COLD) Be sure to keep the lid closed during washing and spinning. DRAIN-HOSE (PUMP) DETERGENT BOX MAGIC FILTER Lint will be collected in the filter during washing. FABRIC SOFTENER DISPENSER POWER CORD SPIN BASKET SOUND ABSORPTION...
CONTROL PANEL POWER BUTTON FUNCTION SELECT BUTTON Press this button once to operate. With every press of this button, the function Press once again to turn the washer off. changes; SOAK, WASH, RINSE, SPIN WASH RINSE SPIN START/HOLD BUTTON WASH & RINSE RINSE &...
WASHING PROCEDURE COURSE BUTTON Before starting washing, check the following; Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose.(In case no drain pump) Put the laundry into the washer and add detergent,too.
SPECIAL COURSE BUTTON Before starting washing, check the following; Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose.(In case no drain pump) Put the laundry into the washer and add detergent,too. Be careful not to overload.
DELAY START COURSE Select this course when you have to go out or do something else. Press the power button to "ON". Press the START/HOLD button and put the proper amount of detergent into tub. POWER Press the DELAY START button once. START/HOLD DELAY START Close the lid.
INSTALLATION & MAINTENANCE ENVIRONMENT ASSEMBLING THE SOUND ABSORBING PANEL Leave some space 1.Insert the sound Maintain at least 10cm between the washer and the wall. absorbing panel Place the washer on a sturdy flat surface. to the assembling hole on back side If the washer is placed on an uneven or weak surface, to the end.
CLEANING THE FILTER NET 1.Push the upper part of 2.Open the cover as 3.Clean the filter. 4. Close the cover and insert the lower part of the filter in the basket first and the filter and pull in. shown in the figure. then push the filter with "click"...
TROUBLESHOOTING Washing machine won't work Water dose not drain Is the water tap opened? Is the drain hose down?(No pump) Is the washer plugged in? Is the drain hose frozen? Is the power cut off? Is the drain hose clogged? Is there enough water? If the water dose not drain in 6 minutes, a buzzer will sound,and the...
WASHING MACHINE Owner’s Instructions WA8565B0 Before operating the unit, please read this manual throughly, and retain for future reference. FEATURES SAFETY INSTRUCTIONS DESCRIPTION OF PARTS CONTROL PANEL WASHING PROCEDURE Fuzzy course Speedy course Blanket course Wool course Delicate course Clean wash course Lingerie course Clean tub couse Delay start course...