Balanced Installation; Grounding - Samsung WA50U1 Owner's Instructions Manual

BALANCED INSTALLATION

• If the washing machine is not installed evenly, it may tremble severely and cause errors
during washing.
Adjusting Height
Adjust the height adjustable legs to make the height of the machine balanced.
Release
(To increase
the height)
Fasten
(To decrease the height)

GROUNDING

The washing machine must be grounded properly for your safety.
• In the case of electric leakage, grounding can prevent electric shocks.
If there is a grounding terminal on the outlet
• You do not need additional grounding.
Grounding terminal
An outlet on the wall
If there is no grounding terminal on the outlet
• Purchase a grounding wire from a Samsung Electronics service center and
connect this to the spot where the grounding symbol (
machine. Then connect the other end of the wire to a metallic water pipe or an
outlet designed for grounding.
• A plastic water pipe does not provide any grounding effect.
• Wind the tap faucet with the copper wire 2 or 3 times.
• When connecting the wire to the copper board, bury it
into the damp ground by 75cm depth.
Caution
Do not ground to the following places.
• Do not ground the washing machine to a telephone cable or a
lightning rod. This may become very dangerous in a case of
lightning.
• Do not ground to a gas pipe. This may cause an explosion.
• If there is no grounding point in the place, connect the electric leakage breaker to
the outlet.
Installation Precautions
• Install the washing
machine on a stable and
balanced surface.
) is at the back of the
Metallic water pipe
Grounding
Copper board
9
• Avoid places where the • Do not install the machine
machine can be exposed where poison gas leakage
to direct rays of sunlight is possible or where the
or high humidity and machine can be frozen in
install it in a place where winter.
the air is well ventilated.