Selecting The Sound Mode - Samsung LW32A30W Owner's Instructions Manual

BN68-448D-03Eng 11/11/03 2:43 AM

Selecting the Sound Mode

The "DUAL I-II" button displays/controls the processing and output of
the audio signal. When power is switched on, the mode is
automatically preset to either "Dual-I " or "Stereo", depending on the
current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual-I/II
Stereo
Stereo
If the receiving conditions deteriorate, listening will be easier
if the mode is set to the MONO.
If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
When receiving a mono sound in the AV mode,
connect to the "AUDIO (L)" input connector on the rear
panel.
Page 37
On-screen indication
MONO (Normal use)
MONO MONO
NICAM (Normal)
STEREO MONO
NICAM (Normal)
Dual-I Dual-II MONO
NICAM NICAM (Normal)
MONO (Normal use)
DUAL-I DUAL-II
STEREO MONO
(Forced mono)
English-37