Connecting To A Cable Box That Descrambles All Channels; Connecting To A Cable Box That Descrambles Some Channels - Samsung TXN3235F Owner's Instructions Manual

I
N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1
Find the cable that is
connected to the
ANTENNA OUT terminal
on your cable box.
2
Connect the other end
of this cable to the
VHF/UHF antenna
terminal on the back of
the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
1
Find and disconnect the
cable that is connected
to the ANTENNA IN
terminal on your
cable box.
2
Connect this cable to a
two-way splitter.
3
Connect a coaxial cable
between an OUTPUT
terminal on the splitter
and the IN terminal on
the cable box.
This terminal might be labeled
"ANT OUT," "VHF OUT," or simply,
"OUT."
This terminal might be labeled
"ANT IN," "VHF IN," or simply,
"IN."
C T
HAPTER WO
2.3
: I
NSTALLATION