Table of Contents
Advertisement
Y
N
T V
O U R
E W
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 10 – 17.
ΠVIDEO Input
Video signals from VCRs, DVD players and similar
devices.
´ AUDIO Input
COMPONENT AUDIO Input
(INPUT 2)
Audio signals from VCRs, DVD players and similar
devices.
Use these jacks to connect the audio signals from
a DVD player when using the DVD video input
jacks. When not using the DVD jacks, these audio
jacks function as audio for Video 2 or S-VIDEO.
ˇ AUDIO-VIDEO MONITOR
Output
These audio-video signals are identical to A/V
signals being displayed on the big screen.
(Typically used as the input signals for a recording
VCR.)
/
(INPUT1 and 2)
English - 8
¨ S-VIDEO Input
S-Video signal from an S-VHS VCR or DVD player.
Note: In S-Video mode, Audio Output depends
what kind of audio input source is connected to
the side audio input jacks (AV2).
ˆ COMPONENT VIDEO Input
Connect video from a DVD player.
Note: Only black and white signals are output
from a monitor in DVD mode.
Ø VHF/UHF
Connect to an antenna or to a cable TV system.
Advertisement
Table of Contents
