Adjusting The Picture Settings - Samsung CS-29A10HW Owner's Instructions Manual

Adjusting the Picture Settings

Your television has several settings which allow you to control
picture quality.
1
Press the MENU button.
Result: The options available in the Picture group are
displayed.
Press the ¦¤ or ‹ button.
2
Press the ▼ or ▲ button to select Adjust.
3
Press the ¦¤ or ‹ button.
4
Result: The options available in the Adjust group are
displayed.
Press the ▼ or ▲ button to select the option (Contrast,
5
Brightness, Sharpness, Color, Color tone or Tint-NTSC only)
to be adjusted. Press the ¦¤ or ‹ button.
Result: The horizontal bar is displayed. Move the horizontal
bar's cursor left or right by pressing the ¦¤ or ‹
button.
➣
◆ If you make any changes to these settings, the picture
standard is automatically switched to Custom.
◆ The television has an "automatic degaussing" system
that is activated if magnetic interference is present.
To degauss the television screen, switch power off by
pressing the " " (On/Off) button on the front panel.
(Refer to "Automatic Degaussing to Remove Colour
Patches" on page 42.)
TV Picture
œ œ Dynamic
Mode
√ √
Adjust
Digital NR : On
LNA : Off
DNIe : On
Scan mode : Natural
œ œ √ √
Move Enter Exit
TV Adjust
Contrast : 90
Brightness : 50
Sharpness : 60
Color : 60
Color tone : 50
œ œ √ √
Move Adjust Exit
Contrast
Color tone
Cool
21
ENG
√ √
70
50
Warm