Table of Contents
Advertisement
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2
Press the "
" button (On/Off) on the front of the television.
Result:
The Standby indicator on the front of the television
lights up.
3
Press the POWER (
television on.
Result:
The programme that you were watching last is re-
selected automatically.
➢
If you have not yet stored any channels, No clear picture
appears. Refer to "Storing Channels Automatically" on page
16 or "Storing Channels Manually" on page 17.
4
To switch your television off, press again the "
on the front of the television.
➢
If your television isn't turned on when the "
(On/Off) is pressed, press the SELECT button to check if
the "TV" mode has been chosen.
) button on the remote control to switch the
" button (On/Off)
" button
Front of the TV
TV
11
ENG
Advertisement
Table of Contents
