Automatic Degaussing To Remove Colour Patches; Troubleshooting: Before Contacting Service Personnel - Samsung CS-29Q2PA Owner's Instructions Manual

Hide thumbs Also See for CS-29Q2PA:
Table of Contents

Advertisement

ENG
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
Normal picture but no sound
No picture or black and white picture
Sound and picture interference
Blurred or snowy picture,
distorted sound
Remote control malfunctions

Automatic Degaussing to Remove Colour Patches

◆ Switch the television off by pressing the "
◆ Unplug the television from the wall socket
◆ Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, and then press the "POWER
If your television will be left unattended, press the "
television off.
Troubleshooting:
46
" (On/Off) button on the front panel
" button on the remote control.
Before Contacting Service Personnel
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the "
POWER (
) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
◆ Check the volume.
◆ Check whether the volume MUTE (
has been pressed.
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
◆ Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
" (On/Off) button to turn your
" button (On/Off) and the
) button on the remote control

Advertisement

Table of Contents
loading

Table of Contents