Storing The Channels Automatically - Samsung CS-25M6W Owner's Instructions Manual

Storing the Channels Automatically

You can scan the frequency ranges available on your television and
in your area and store all the channels found automatically.
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to "Sorting the Stored
Channels" on page 19.
1
Press the MENU button.
2
Press the or button to select the "Channel".
3 + –
Press the or button to select the "Auto store".
4 + –
Press the or button again.
Result: The "Auto store" menu is displayed with the "Area"
selected.
5
Select your country by pressing the
countries are available: ASIA W/EUROPE - CIS E/EUROPE -
CHINA - HONGKONG U/K - AUSTRALIA - NZ/INDONESIA -
SOUTH AFRICA - AMERICA.
6
Press the or button to select the "Search" and press the
–
button.
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end automatically.
7
When searching and storing is complete, the "Sort" menu is
displayed.
To...
Sort the stored channels
into the desired numerical order
Exit the channel store function
without sorting the channels
+ –
or button. The following
+
or
Then...
Go to Step 4 of the "Sorting
the Stored Channels"
procedure on page 19.
Press the MENU button
repeatedly until the menus
disappear.
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Sort
Select Enter Exit
Auto store
Area : ASIA W/EUROPE
Search : -/+
Select Adjust
Auto store
Area : ASIA W/EUROPE
Search : -/+
Select Search
P 8 C25 -----
426 MHz 22 %
Exit
Sort
From : P 1
To : P--
Store : ?
Select Adjust
13
ENG
Exit
Exit
Exit