Table of Contents
Advertisement
Display
Banner
This menu allows you to set a banner message to
be displayed at the bottom of the display in Standby
mode.
1. If necessary, press the C key to delete each
letter of the old greeting. Press and hold to clear
the display.
2. Enter your banner message. For further details
about how to enter characters, see page 37.
3. When you finish entering the message, press
the OK soft key to save the new banner.
Dual Clock
You can choose two time zones to be displayed
when you select Dual Clock for the Idle mode
image; for details, see page 90.
To select time zones for the dual clock:
1. When Location highlights, press the Down key.
2. Select the time zone for the first clock by
pressing the Left or Right key, and press the
Down key.
3. Select the time zone for the second clock by
pressing the Left or Right key.
4. Press the Save soft key to confirm the selection.
To apply the daylight saving time:
1. When Location highlights, press the Left or
Right key to display DST. Press the Down key.
92
(Menu 7-4)
(Menu 7-5)
Advertisement
Table of Contents
