Checking Parts; Setting Up - Samsung MT1066SE Owner's Manual

Your New Toast & Bake Microwave oven

Checking Parts

Unpack your oven and check to make sure that you have all the parts
shown here. If any part is missing or broken, call your dealer.
glass tray
oven
metal wire rack
(DE97-00318B)
registration card
Note :
The white plastic tubing on the crumb tray and wire rack must not be
removed.
Warranty and Service Information
To help us better serve you, please complete the enclosed registration
card and promptly return it by mail. If the registration card is missing. you
can call united Matbouli group at 800-2-444-999 or register on line at
www.samsungmea.com.When contacting Samsung, please provide the
specific model and serial number information which is usually located on
the back or bottom of the product. Please record these numbers below,
along with the other requested information. Keep this information in a
safe place as a permanent record of your purchase to aid in identifica-
tion in case of theft or loss, and a copy of your sales receipt as a proof of
purchase if warranty service is needed.
MODEL NUMBER ____________________
SERIAL NUMBER ____________________
DATE PURCHASED ____________________
PURCHASED FROM ____________________
Warranty service can only be performed by a Samsung Authorized
Service Center. If you should require warranty service, provide the
above information with a copy of your sales receipt to the Samsung
Authorized Service Center. For service assistance and the location of
the nearest service center please call 800-2-444-999 or go on line to
umg.com.sa
roller guide ring
Instruction manual
crumb tray
(DE97-00327A)

Setting Up

1
Place the oven on a flat, sturdy surface and plug the cord into a
grounded outlet. Once plugged in, the display on your oven will
show::
START ENTER TIME HEAT MICRO
Kg g Oz Lbs QTY
Make sure there is adequate ventilation for your oven by leaving
at least four inches of space behind, above, and to the sides of
the oven.
2
Open the oven door by pulling the handle at the top of the door.
3
Wipe the inside of the oven with a damp cloth.
4
Place the pre-assembled ring in the indentation in the center of
the oven.
5
Place the glass tray on top of the ring so that the three glass tabs
in the center of the tray fit securely into the tabs on the floor of
the oven.
5