Airing Your Room - Samsung AHT18FGMBC Owner's Instructions Manual

Airing Your Room

Remote Control Control Panel
10
E-
If the atmosphere in your room is stale, you can air it using the Fan
feature and if necessary, evacuate the stale air outside.
1 If you wish to evacuate stale air outside, push the ventilation lever on the front
of the unit to the right and the open position (
Result: The air inside the room circulates and stale air is evacuated outside.
Otherwise, push the ventilation lever to the left and the closed position (
Result: The air simply circulates inside the room.
2
If necessary, press the
Result: The operating mode indicator (COOL, FAN or HEATER)
on the unit comes on.
The air conditioner starts up in the mode selected
when the unit was last used.
The unit beeps twice.
3 If the FAN indicator is not lit up on the unit:
Press the button on the remote control
or
Press the button on the unit one or more times until the FAN
indicator lights up
Result: The unit beeps each time you press
The air conditioner starts up in Fan mode.
You can change modes at any time.
When the air conditioner is in Fan mode, the
temperature is not displayed; in this case, you do not
need to set the temperature.
4
To set the fan speed to...
High
Med
Low
Result: Each time you press a button, the unit beeps.
5 To control the direction of the air flow, refer to page 11.
).
(On/Off) button.
Then...
Press the button on the remote control.
or
Press the on the unit until the
indicator lights up
Press the button on the remote control.
or
Press the on the unit until the
indicator lights up
Press the button on the remote control.
or
Press the on the unit until the
indicator lights up
).
.