Table of Contents
Advertisement
Timer Recording
Introduction
Use 'Timer Recording' to automatically
start and stop a recording at a later date/
time. The DVD recorder will tune to the
right programme number and begin
recording at the specified time.
With this DVD recorder, you can pre-
programme up to six recordings within
a period of 15 days.
To make a programmed recording,
your DVD recorder needs to know:
– The date you want to make the
recording.
– The programme number of the TV
channel.
– The start and stop time of the recording.
– The recording mode (M1/M2/M2x/M3/
M4/M6/M8), see page 34.
TIPS:
To play a DVD+R on other DVD players, see "Finalising disc (DVD+R)".
During timer recording, press STANDBY-ON will stop recording.
38
DVDR6xx_69_Eng_14212
Programming recordings
1
Turn on the TV power. Select the correct
Video In channel at the TV.
2
Press TIMER on the remote control.
➜
The timer overview appears.
G
If the time has not set yet, the { Time
and Date } menu will appear on the
screen, see page 25.
3
Press the matching colour coded button
on the remote control to select { New
Timer }.
➜
The timer entry screen appears.
4
Press 3 4 to select an entry in the menu
and press 2 to confirm.
5
Press 3 4 to select an option or make an
entry (character/number).
➜
Press 1 2 to move to the previous or
next entry field if necessary.
{ Start time }
– Enter the start recording time and
press OK to confirm.
{ Stop time }
– Enter the stop recording time and
press OK to confirm.
{ Date }
– Enter the date for recording (Day/
Month/Year) and press OK to confirm.
38
3139 246 14212
9/1/04, 5:30 PM
Advertisement
Table of Contents
