Advertisement
3
Remove the VIDEO I/F board
recorder and replace it with the VIDEO I/F board
as part of this product.
4
Remove the VTR SYSCON board
IC (IC6) mounted on it with the ROM IC supplied as part of
this product.
5
After replacing the ROM IC, reinstall the VTR SYSCON
D
board
in the camera-recorder.
6
Engage the board holder fitting and replace the side panel.
(Secure both in place using the screws.)
VTR SYSCON board
d
Replace ROM IC.
f
O The camera-recorder will require adjustment after the
product is installed. For details on the necessary
adjustments, contact your dealer or a Panasonic
Service Center.
Replace VIDEO I/F board.
4
f
installed in the camera-
D
and replace the ROM
f
f
supplied
Advertisement
