Advertisement
59 VTR Video Output Selection Switch 2
(SELECT 2)
When the VTR Video Output selection Switch 1 is
set to the SELECT 2 position, this switch select the
video output signal supplied at the VTR/RCU
Connector (41).
Y/C/B:
The chrominance (C) and luminance (Y) sig-
nals are supplied from the R, G and B Output
Connectors for S-VHS format VTR.
Y/PB/PR:
The color difference (R-Y & B-Y) signals and
luminance (Y) signal are supplied from the
VTR/RCU Connector and the R,G and B Output
Connectors for MII format VTR.
INSTALLATION
1. Mount the Camera Adaptor on the Camera Head
while engaging the 68-pin connector.
2. Tighten two Camera Adaptor Holding Screw/Knobs
firmly, and make sure the Camera Adaptor
securely fixed to the camera.
CAUTION:
When mounting the Camera Adaptor make sure it
slides back straight and engaging the connectors
and lock mechanism squarely in order to prevent
bending of the pins in the connector.
Note:
Camera Adaptor Removal
Remove the camera adaptor while pressing up the
release button underneath the camera head after
loosing the two knobs on the camera adaptor.
R/G/B:
The R, G and B signals are supplied from the
R, G snd B Output Connector.
60. Camera Adaptor Holding Screw/knob
The screws/knobs are used to fix the camea adap-
tor to the Camera head.
61. 68-pin Multi Connector
When mounting the camera adaptor, engage the
68-pin connectors on the camera and this adaptor.
is
-4-
Tighten two screws
Camera Adaptor
Holding Screw/Knobs
Advertisement
