Ring Or Vibrate; Phone Lock - Motorola ST8000 Quick Reference

Ring Or Vibrate

i Press E8 to toggle VibraCall™ alert on or off
This option sets the way your phone alerts you to an incoming
call. The Quick Access version will allow you to toggle between
Ring Only and Vibrate Only
in the menu are as follows:
• - the phone will ring with the tone specified by
Ring Only
the Set Ringer Tone option.
• - the phone will vibrate using the VibraCall™
Vibrate Only
alert.
• Vibrate Then Ring - the phone will vibrate twice, then ring.
• No Ring Or Vibrate - the phone will display
The setting you choose also defines the type of alert for an
A
incoming SMS message (except that if you select Vibrate Then
Ring, your phone will just vibrate).
j Set Ringer Tone j
j j
This option sets the tone your phone will make when an
incoming call is received.
Standard Tone
Your phone makes a standard ringing tone.
Single Ring Tone - Music Tone
When selected, your phone will produce one of these alternative
ringer tones.
If you select the Single Ring Tone option, the phone will only
A
ring once when a call is received.
52
Using the Options Menu
. The full set of options available
Answer?
j Set Ringer Tone 2 j j j
This option sets the tone your phone will make when an
incoming call is received on Line 2.
This option will not appear if you do not subscribe to Line 2.
A
j Phone Lock j j j
This submenu is used to set and change the unlock code.
The unlock code is a four-digit number which is set at
manufacture to 1234. This can be changed at any time by using
.
Change Unlock Code
Automatic Lock
This option can be used to automatically lock your phone each
time it is switched on.
The option has two settings,
Lock Now
i
Press E5 to lock phone
This option can be used to immediately lock your phone. Once
selected, your phone will be unusable until the unlock code is entered.
Change Unlock Code
This option is used to change the unlock code.
After selecting this option, you will be asked to enter the current
security code before you can proceed.
You can now enter a four-digit code to replace the old code.
By pressing M, you can access this option even when the
A
phone is locked.
On or Off .