Motorola SELECT 2000 Manual page 39

Forward All Data Calls
Use this option to forward all data calls to a single number.
The option has two settings,
If you change the setting to
forwarding phone number using the digit keys.
Cancel All Forwarding
Use this option to cancel the forwarding of incoming calls.
! This option resets all forwarding settings to
all forwarding numbers.
jCall Holding and Call Waiting
Your phone supports the PCS network options of Call Holding and
*
Call Waiting . Using these options, you can place a current phone
call on hold and accept an incoming call or start a second call.
The Call Waiting menu item has two settings,
select , you will not be notified of waiting calls. The person
Off
trying to contact you will either receive a busy tone or be
forwarded if
Detailed Forwarding
* Network dependent feature.
or .
On Off
On , you will be asked to enter a
and removes
Off
On or Off . If you
- . is activated.
If Busy
Call Waiting
If Call Waiting is , you will be notified of an incoming call by an
On
audible alert and by the message
To accept the incoming call, press O. The other caller will
•
automatically be placed on hold.
To reject the incoming call, press C or press M and select
•
.
Reject Call Waiting
If you would like to end the active call first, press M and select
End Active Call? The phone will then ring and can be
answered normally.
If you have CLI, the caller's information will be displayed
A
instead of the call waiting message.
Call Holding
If you would like to put an active call on hold to make another
call, press M and select
Call Hold
select .
Make New Call
To end a held call, press M and select
•
Switching between calls
Pressing O will switch you between the active and held calls.
The other caller will automatically be placed on hold.
Using the Options Menu
Call Waiting - Answer?
. Then press M again and
End Held Call .
37