Basic Operation; Turn Phone On And Off - Motorola 4500 Manual

Getting Started
Control Keypad
R
Recalls and displays telephone
numbers stored in memory.
C
Clears the last digit entered when
pressed and released. Press and hold
to clear the entire display.
S
Initiates a call or answers a call.
P
Turns the phone on and off.
s
Stores telephone numbers into any of
the memory locations.
E
Terminates a call in progress.
F Function Key
Used in combination with other buttons for
specific user-programmed functions (e.g.,
F, 5 activates lock mode).
14

Turn Phone On and Off

1. If installed in your vehicle, your phone
should turn on and off with the vehicle's
ignition. If it does not, or if the phone is in a
bag configuration, press P .
2. Press P again to turn unit off.
Start-up Self Tests
Each time the telephone is turned on, it performs
a series of self tests, sounds a tone, and lights all
display positions and status indicators to check
their operation.
Display Messages
Message Explanation Explanation
•If your phone is programmed for
two cellular systems, one of these
messages will appear in the
A 1 A 2
display upon power up.
B1 B2
•These are reminders as to which
system and phone number are
currently in use.
•Indicates that the phone has been
locked and cannot send or receive
LOCKED
calls until unlocked. Refer to page
49, "Electronic Lock".

Basic Operation

15