Kenwood TK-2200 Instruction Manual page 34

To change the functions of the Call and Monitor keys:
1
2
Release the key.
3
4
26
With the transceiver power OFF, press
and hold the Lock and Scan keys
while turning the transceiver power ON.
Continue to hold the Lock and Scan
1
keys until the LED flashes orange one time
and the transceiver announces "Setup".
Continue to press and hold the key to
be reprogrammed (either the Lock key
or the Scan key), while releasing the
remaining key.
The transceiver will announce "Table
zero" (as shown in the table above).
If you continue to hold both keys, or if
you release both keys, the operation will
cancel in 5 seconds.
Press the Lock key to increment the
Table number or the Scan key to
decrement the number, to select the
new key function
Table numbers and their corresponding
functions are provided in the table above.
A voice announcement will inform you of
the currently selected Table number.