Kenwood Sovereign VR-5900 User Manual page 51

How Do I Operate Devices?
6. Touch to return to the CD controls.
To read the loaded track titles and store them in PowerTouch III:
1. Make sure you have followed the previous instructions to read disc
data.
2. Touch (HOME1) on Quick Access menu.
3. Touch
4. Touch . This accesses the disc mode commands.
5. If you haven't already done so on the CD changer, touch
This reads all of the disc and track title information into the CD
changer's memory. Touch
6. Touch
7. Use the up
8. Touch to play a disc, and then touch
9. Touch .
10. Set PowerTouch III down so that its IR transmitter window is aiming
at the receiver's IR transmitter window. Touch
Do not move PowerTouch III while it is reading data.
This process may take some time, depending on how many tracks CD
has you have loaded. You will see the track titles on the PowerTouch
III when it is finished reading data.
11. Touch to return to the CD controls.
Entering Disc and Track Titles
You can also use PowerTouch III to enter disc or track titles, if they are not
already stored on the changer. The titles you add are stored in memory
on both PowerTouch III and the changer.
To enter disc or track titles:
.
to return to the CD controls.
to select the disc you want to play.
or down arrow to scroll through the disc titles.
to stop playback.
.
.
43