Connecting A Microphone Or Audio Component - Kenwood MGR-A7 Instruction Manual

Connecting a microphone or audio component

In addition to the built-in microphones, an external microphone or audio component
can be connected to this unit for recording the music and voice input from it.
¡ Recording from the built-in microphones
Built-in
microphones
Do not connect
anything.
™ Recording from an external microphone
Microphone
input
Plug-in power
switch
Dynamic microphone, etc.
(Set to OFF.)
Condenser microphone with the plug-in
power type
(Set to ON.)
£ Recording from an external audio component or musical instrument
connected to the line input
Line input
• Prepare the required adapters, such as a standard stereo plug cable or RCA pin plug – stereo
miniplug adapter (commercially available in audio stores), according to the output terminals of
the external microphone or audio component.
• When connecting a condenser microphone with built-in battery, set the PLUG IN POWER
switch to OFF.
25
Musical instrument, etc.
(Line output)
Stereo, etc.
English